Removal And Installation

STARTER MOTOR


Removal and Installation


REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Remove engine undercover, using power tools.
3. Remove exhaust mounting bracket. .





4. Disconnect steering lower joint (1), then remove it. Exploded View.
5. Remove "B" terminal nut (A).





6. Disconnect "S" connector (B).
7. Remove starter motor mounting bolts (A), using power tools.





8. Remove starter motor (1) downward from the vehicle.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Be sure to tighten "B" terminal nut carefully.