B2470

B2470 SYS HEAT PROTC DR





Description
When fastening and unfastening seat belt or opening and closing door is repeated continuously for a short period of time, the system temporarily deactivates the retracting function of seat belt to prevent excessive heating. The system recovers automatically.




DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.SELF-DIAGNOSIS WITH PRE-CRASH SEAT BELT CONTROL UNIT
1. Turn ignition switch ON.
2. Check "Self-diagnostic result" with CONSULT-III.
Is DTC detected?
YES - SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK THE VEHICLE CONDITION WITH CONSULT-III DATA MONITOR
1. Check "HEAT PROTC LH" of DATA MONITOR.
2. Wait until "OFF" appears.
3. Perform the self-diagnosis, after performing the check.
4. Touch "ERASE".
5. Perform DTC Confirmation Procedure.
See SEE DTC Logic.
Is DTC B2470 displayed again?
YES - GO TO 2.
NO - INSPECTION END
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END