Special Repair Requirement

INSPECTION AND ADJUSTMENT


THROTTLE VALVE CLOSED POSITION LEARNING : Special Repair Requirement


TYPE A
1.START
1. Check that accelerator pedal is fully released.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
- END

TYPE B
1.START
WITH CONSULT-III
1. Turn ignition switch ON.
2. Select "CLSD THL POS LEARN" in "WORK SUPPORT" mode.
3. Follow the instructions on the CONSULT-III display.
4. Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
WITHOUT CONSULT-III
1. Start the engine.

NOTE:
Engine coolant temperature is 25�C (77�F) or less before engine starts.
2. Warm up the engine.

NOTE:
Raise engine coolant temperature until it reaches 65�C (149�F) or more.
3. Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
- END