Exterior View Display Module: Service and Repair

AROUND VIEW MONITOR CONTROL UNIT


Removal and Installation


REMOVAL
1. Remove AV control unit. Service and Repair.
2. Remove around view monitor control unit mounting screws.
3. Disconnect around view monitor control unit connector to remove around view monitor control unit.

INSTALLATION
1. Install in the reverse order of removal.
2. Perform camera image calibration. Work Procedure.
3. Perform predictive course line center position adjustment. Work Procedure.

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.