Seat Bottom: Service and Repair
SECOND SEAT
SEAT CUSHION : Disassembly and Assembly
DISASSEMBLY
1. Remove the seat cushion trim and seat cushion pad.
1. Remove the seat cushion retainer.
2. Move seat cushion so that harness connector (A) of seat cushion heater is visible. (heater seat model only)
3. Disconnect the seat cushion heater unit harness connector
(A). (heater seat model only)
4. Remove the seat cushion trim and seat cushion pad from the seat cushion frame.
5. Remove the hog rings and separate the seat cushion trim and seat cushion pad.
2. Remove the reclining lever knob.
Remove snap ring (1) downward using a hook and pick tool.
Remove reclining lever knob (2).
3. Remove the reclining device outer cover (outside)
Pull reclining device outer cover forward and disengage pawls.
Triangle: Pawl
4. Remove the fixing screw and then remove seat cushion under cover.
5. Remove the reclining device outer cover (inside).
6. Remove the center seat belt anchor. Removal And Installation.
7. Remove the seatback trim and seatback pad. Second Seat.
8. Remove the device arm cover.
9. Remove the reclining device inner cover (outside) (1) and reclining device inner cover (inside) (2).
Triangle: Pawl
10. Remove the seat cushion frame.
1. Remove the seatback control wire (A) and seat cushion control wire (B).
2. Remove seatback control wire installed to seat cushion frame.
3. Remove the mounting bolts and then remove seat cushion frame.
11. Remove the seat cushion hinge cover
- Disengage pawls on front side of seat cushion hinge cover.
- Disengage pawls on rear side of seat cushion hinge cover.
Triangle: Pawl
12. Remove the mounting bolts and then remove seat hinge assembly.
1. Remove the seat cushion trim and seat cushion pad.
1. Remove the seat cushion retainer.
2. Move seat cushion so that harness connector (A) of seat cushion heater is visible. (heater seat model only)
3. Disconnect the seat cushion heater unit harness connector
(A). (heater seat model only)
4. Remove the seat cushion trim and seat cushion pad from the seat cushion frame.
5. Remove the hog rings and separate the seat cushion trim and seat cushion pad.
2. Remove the reclining lever knob.
Remove the snap ring (1) downward using a hook & pick tool.
Remove the reclining lever knob (2).
3. Remove the reclining device outer cover (outside)
Pull reclining device outer cover forward and disengage pawls.
Triangle: Pawl
4. Remove the reclining device outer cover (inside).
5. Remove the seat cushion frame.
1. Remove the fixing screw and then remove seat cushion under cover.
2. Remove the seatback control wire (A) and seat cushion control wire (B).
3. Remove the seatback control wire installed to seat cushion frame.
4. Remove the mounting bolts and then remove seat cushion frame.
6. Remove the seat belt buckle. Removal And Installation.
7. Remove the seat cushion carpet.
8. Remove the seat cushion hinge cover
- Disengage pawls on front side of seat cushion hinge cover.
- Disengage pawls on rear side of seat cushion hinge cover.
Triangle: Pawl
9. Remove the mounting bolts and then remove seat hinge assembly.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
- Install the hog rings of seat trim in position, and then securely connect the trim or trim cord with the seat frame.
- Adjust the cable when installing the seatback control wire and seat cushion control wire. Adjustments.