Removal and Installation

PARKING BRAKE CONTROL


Removal and Installation


REMOVAL
1. Remove rear tires with power tool.
2. Remove instrument lower panel LH. Removal And Installation.
3. Hang fuse block (J/B) not to interfere with work.
4. Disconnect parking brake switch harness connector.
5. Remove adjusting nut and loosen front cable.
6. Remove parking brake pedal assembly.
7. Remove center console assembly. Removal And Installation.
8. Separate front cable from rear cable, and remove front cable.
9. Remove pin and remove rear cable from toggle lever. Removal and Installation.
10. Remove rear cable.

INSTALLATION
Rote the following, Install the reverse order of the removal.
- Never reuse the adjusting nut.
- Perform adjustment after installation. Adjustments.