Front Coil Spring And Shock Absorber

FRONT COIL SPRING AND SHOCK ABSORBER


Inspection and Adjustment


INSPECTION AFTER REMOVAL (WITH HBMC)

Shock Absorber assembly
Check shock absorber assembly for oil leakage or other malfunctions. Replace it if necessary.

INSPECTION AFTER DISASSEMBLY (WITHOUT HBMC)

Shock Absorber
Check the following items, and replace the part if necessary.
- Shock absorber for deformation, cracks or damage.
- Piston rod for damage, uneven wear or distortion.
- Oil leakage.

Shock Absorber Mounting Bracket and Rubber Parts Inspection
Check shock absorber mounting bracket for cracks and rubber parts for wear. Replace it if necessary.

Coil Spring
Check coil spring for cracks, wear or damage. Replace it if necessary.

INSPECTION AFTER INSTALLATION
1. Check wheel sensor harness for proper connection. Exploded View.
2. Check wheel alignment. Wheel Alignment Inspection.
3. Adjust neutral position of steering angle sensor. Work Procedure.
4. Adjust levelizer adjustment of height sensor. Special Repair Requirement Xenon Type.

ADJUSTMENT AFTER INSTALLATION (WITH HBMC)
Bleed air from the HBMC. Air Bleeding Method.