Removal And Installation

CENTER CONSOLE ASSEMBLY

Removal and Installation


CAUTION:
When removing, always use a remover tool that is made of plastic.

REMOVAL

1.Remove console upper finisher.





1.Open the console lid.
2.Remove console upper finisher (1) fixing pawls with remover tool (A).
3.Pull back console upper finisher.





2.Remove console finisher assembly.
1.Remove selector lever knob. Removal And Installation.





2.Remove console finisher assembly (1) fixing clips with remover tool (A).
3.Pull up console finisher assembly.
4.Disconnect harness connector.





3.Remove console switch finisher.





1.Remove console switch finisher (1) fixing screws (A).
2.Pull up console switch finisher.
3.Disconnect harness connectors.
4.Remove console pocket assembly.





1.Pull back console pocket assembly (1), and disengage clips.
2.Disconnect harness connector.





5.Remove console rear finisher.
1.Put front seat to front must position.





2.Pull back the console rear finisher (1) with remover tool (A).
3.Disconnect harness connectors.





6.Remove rear ventilator duct. Rear Ventilator Duct 1.
7.Remove center console assembly.





1.Remove center console fixing screws (A).
2.Disconnect USB connector harness connector. Removal And Installation.
3.Disconnect console power socket harness connector. Removal And Installation.





4.Remove center console assembly fixing screws (A).





5.Pull back and lift up center console assembly (1).






INSTALLATION

Install in the reverse order of removal.