Work Procedure

ADDITIONAL SERVICE WHEN REPLACING AUTOMATIC BACK DOOR CONTROL UNIT

Work Procedure


1. STEP 1

Fully close the back door manually.
- GO TO 2.

2. STEP 2

Operate back door opener switch and perform automatic back door open operation.
NOTE:
At this time, automatic operation of back door is performed at half speed.
- GO TO 3.

3. STEP 3

1.The back door fully opens.
2.Check that hazard lamp blinks and automatic back door warning buzzer sounds normally.
Does hazard lamp blink and automatic back door warning buzzer sound normally?
YES- GO TO 4.
NO- GO TO 1.

4. STEP 4

Fully close the back door.
- WORK END