B210B

B210B STARTER CONTROL RELAY

Description

Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in the N or P position. It is installed in parallel with the starter relay.


DTC Logic


DTC DETECTION LOGIC

NOTE:
If DTC B210B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Security System.






DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Turn the power supply position to start under the following conditions and wait for at least 1 second.
-Selector lever is in the P or N position.
-Do not depress brake pedal.
2.Check "Self diagnostic result" with CONSULT.
Is DTC detected?
YES- Go to .
NO- INSPECTION END


Diagnosis Procedure


1. INSPECTION START

1.Turn ignition switch ON.
2.Check "Self diagnostic result" for IPDM E/R with CONSULT.
3.Touch "ERASE".
4.Perform DTC Confirmation Procedure.
See .
Is the DTC B210B displayed again?
YES- Replace IPDM E/R. Refer Removal And Installation.
NO- INSPECTION END