With Navigation

SIDE CAMERA LH IMAGE SIGNAL CIRCUIT

Description

- Around view monitor control unit supplies to the front camera, rear camera and side camera. And then it superimpose the images from each camera and outputs then to the display unit.
- Superimpose the guiding lines, predictive course line and sonar indicator to the camera image that outputs to the display unit.
- Around view monitor control unit performs the reception/transmission of communication signal with each camera.


Diagnosis Procedure


1. CHECK CONTINUITY SIDE CAMERA LH POWER SUPPLY AND GROUND CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect around view monitor control unit connector and door mirror (driver side) connector.
3.Check continuity between around view monitor control unit harness connector and door mirror (driver side) harness connector.





4.Check continuity between around view monitor control unit harness connector and ground.





Is inspection result normal?
YES- GO TO 2.
NO- Repair harness or connector.

2. CHECK VOLTAGE SIDE CAMERA LH POWER SUPPLY

1.Connect around view monitor control unit connector and door mirror (driver side) connector.
2.Turn ignition switch ON.
3.Check voltage between around view monitor control unit harness connector and ground.





Is inspection result normal?
YES- GO TO 3.
NO- Replace around view monitor control unit. Refer to "Exploded View" With Navigation.

3. CHECK CONTINUITY SIDE CAMERA LH IMAGE SIGNAL CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect around view monitor control unit connector and door mirror (driver side) connector.
3.Check continuity between around view monitor control unit harness connector and door mirror (driver side) harness connector.





4.Check continuity between around view monitor control unit harness connector and ground.





Is inspection result normal?
YES- GO TO 4.
NO- Repair harness or connector.

4. CHECK SIDE CAMERA LH IMAGE SIGNAL

1.Connect around view monitor control unit connector and door mirror (driver side) connector.
2.Turn ignition switch ON.
3.Check signal between around view monitor control unit harness connector.





Is inspection result normal?
YES- Replace around view monitor control unit. Refer to "Exploded View" With Navigation.
NO- Replace side camera LH. Refer to "Exploded View" With Navigation.