Removal and Installation

FENDER PROTECTOR

FENDER PROTECTOR : Removal and Installation


REMOVAL

1.Remove front fillet molding. Refer to "Removal and Installation" Removal and Installation.





2.Remove front fender (rear) fixing grommets (A) with remover tool (B).





3.Remove center mudguard (1) fixing screws (A).
4.Remove center mudguard fixing bolt (B).
5.Remove clips of fender protector (rear).
6.Remove fender clip from wheel house arches, and then remove fender protector (rear) from wheel house.





7.Remove front fender (front) fixing grommet (A) with remover tool (B).





8.Remove fender protector (front) fixing bolts (A).
9.Remove fender protector (front) mounting clips.
10.Remove fender clip from wheel house arches, and then remove fender protector (front) from wheel house.
11.Remove the following parts after removing front fender protector.
- Air guide
- Fender clip

INSTALLATION

Install in the reverse order of removal.