Removal and Installation

STARTER MOTOR

Removal and Installation


REMOVAL

1.Disconnect the battery cable from the negative terminal. Refer to "Removal and Installation" Removal and Installation.
2.Remove engine undercover, using power tools.
3.Remove exhaust mounting bracket. Refer to "Exploded View" Exploded View.





4.Disconnect steering lower joint (1), then remove it. Refer to ST23, "Exploded View".
5.Remove "B" terminal nut (A).





6.Disconnect "S" connector (B).
7.Remove starter motor mounting bolts (A), using power tools.





8.Remove starter motor (1) downward from the vehicle.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
Be careful to tighten "B" terminal nut to the specified torque.