With Navigation

CAMERA IMAGE SIGNAL CIRCUIT

Description

Around view monitor control unit supplies to the front camera, rear camera and side camera. And then it superimpose the images from each camera and outputs then to the display unit.


Diagnosis Procedure


1. CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect display unit connector and around view monitor control unit connector.
3.Check continuity between display unit harness connector and around view monitor control unit harness connector.





4.Check continuity between display unit harness connector and ground.





Is inspection result normal?
YES- GO TO 2.
NO- Repair harness or connector.

2. CHECK CAMERA IMAGE SIGNAL

1.Connect display unit connector and around view monitor control unit connector.
2.Turn ignition switch ON.
3.Check signal between display unit harness connector and ground.





Is inspection result normal?
YES- Replace display unit. Refer to "Exploded View" With Navigation.
NO- Replace around view monitor control unit. Refer to "Exploded View" With Navigation.