Back Door Finisher

BACK DOOR TRIM

BACK DOOR FINISHER : Removal and Installation


REMOVAL

1.Remove the back door pull handle.





2.Remove the back door finisher clips (A).
Revision: March 20122013 Infiniti JX





3.Release the back door finisher clips using a suitable tool.





4.Disconnect the harness connectors from the back door finisher, then remove the back door finisher.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Visually check the clips for deformation and damage during installation. Replace with new ones if necessary.
- When installing back door finisher, check that clips are securely fitted in body panel holes.