Luggage Side Upper Finisher

LUGGAGE FLOOR TRIM

LUGGAGE SIDE UPPER FINISHER : Removal and Installation


REMOVAL






1.Remove the luggage side upper finisher cover, then remove the luggage side upper finisher bolt (A).
2.Remove rear pillar finisher. Refer to "REAR PILLAR FINISHER : Removal and Installation" Rear Pillar Finisher.
3.Remove back pillar finisher. Refer to "BACK PILLAR FINISHER : Removal and Installation" Back Pillar Finisher.
4.Release the clips, then remove the luggage side upper finisher.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
- Visually check the clips for deformation and damage during installation. Replace with new ones if necessary.
- When installing luggage side upper finisher, check that clips are securely fitted in body panel holes.