Meter Buzzer Circuit

METER BUZZER CIRCUIT

Description

- The buzzer for the warning chime system is installed in the combination meter.
- The combination meter sounds the buzzer based on the signals transmitted from various units.


Component Function Check


1. CHECK OPERATION OF METER BUZZER

1.Select BUZZER of BCM on CONSULT.
2.Perform LIGHT WARN ALM or SEAT BELT WARN TEST of ACTIVE TEST.
Does meter buzzer activate?
YES- Inspection End.
NO- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK COMBINATION METER INPUT SIGNAL

Select the Data Monitor for the "METER/M&A and check the BUZZER monitor value.





Is the inspection result normal?
YES- Replace combination meter. Refer to "Removal and Installation" Service and Repair.
NO- Replace BCM. Refer to "Removal and Installation" Service and Repair.
Revision: March 20122013 Infiniti JX