Diagnosis Procedure

TOUCH SENSOR

RH : Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" Electrical Diagrams.

1. CHECK TOUCH SENSOR INPUT SIGNAL

1.Turn ignition switch OFF.
2.Check voltage between touch sensor RH harness connector and automatic back door control module harness connector.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK TOUCH SENSOR RH CIRCUIT

1.Disconnect automatic back door control module and touch sensor RH connector.
2.Check continuity between automatic back door control module harness connector and touch sensor RH
harness connector.





3.Check continuity between automatic back door control module harness connector and ground.





Revision: March 20122013 Infiniti JX
Is the inspection result normal?
YES- Replace automatic back door control module. Refer to "Removal and Installation" Service and Repair.
NO- Repair or replace harness.

3. CHECK TOUCH SENSOR RH GROUND CIRCUIT

1.Disconnect automatic back door control module and touch sensor RH connector.
2.Check continuity between automatic back door control module harness connector and touch sensor RH
harness connector.





3.Check continuity between automatic back door control module harness connector and ground.





Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace harness.

4. CHECK TOUCH SENSOR RH GROUND CIRCUIT 2

1.Connect automatic back door control module and touch sensor RH connector.
2.Check voltage between automatic back door control module harness connector and ground.





Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace harness.

5. CHECK TOUCH SENSOR RH

Refer to "RH : Component Inspection" Component Inspection.
Is the inspection result normal?
YES- GO TO 6.
NO- Replace touch sensor RH. Refer to "TOUCH SENSOR : Removal and Installation" Touch Sensor.

6. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.