Removal and Installation

THIRD ROW SEATS

Removal and Installation


CAUTION:
- Before removal and installation, use shop cloths to protect parts from damage.
- During removal and installation, an assistant is required to protect against injury or damage.

REMOVAL

1.Release the pawls and remove the seat bolt covers.
2.Remove the two seat bolts on the front side of the third row seats.
3.Pull the seatback release lever and fold down the RH seatback, then repeat for LH seatback.
4.Remove the storage box. Refer to "STORAGE BOX : Removal and Installation" Storage Box.
5.Remove the four bolts, then remove the jack and jack bracket as an assembly.





6.Release the clip (A) and remove the rear side cover (1).
LH side shown, RH side similar
: Front
Revision: March 20122013 Infiniti JX
7.Remove the two seat belt buckle anchor bolts. Refer to "Third Row Seat Belt" Third Row Seat Belt.
8.Remove the two rear outer seat bolts on the rear side of the third seat.
9.Remove the third row seat from the vehicle.

INSTALLATION

Installation is in the reverse order of removal.
NOTE:





- When installing the third row seat, tighten the bolts in the order shown.