Combination Meter

POWER SUPPLY AND GROUND CIRCUIT

COMBINATION METER : Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram With Intelligent Cruise Control" With Intelligent Cruise Control or
"Wiring Diagram Without Intelligent Cruise Control" Without Intelligent Cruise Control.

1. CHECK FUSES

Check for blown combination meter fuses.





Is the inspection result normal?
YES- GO TO 2
NO- Replace the fuse after repairing the affected circuit.

2. POWER SUPPLY CIRCUIT CHECK

1.Disconnect combination meter connector.
2.Check voltage between combination meter harness connector M24 terminals 5, 21, 22 and ground.





Is the inspection result normal?
YES- GO TO 3
NO- Repair or replace harness or connectors.

3. GROUND CIRCUIT CHECK

1.Turn ignition switch OFF.
2.Check continuity between combination meter harness connector M24 terminals 1, 2 and ground.





Is the inspection result normal?
YES- Inspection End.
NO- Repair or replace harness or connectors.