Information Bus: Service and Repair

CAN GATEWAY

Removal and Installation


CAUTION:
Before replacing CAN gateway, perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to "Description" Description.

REMOVAL

1.Remove the AV control unit. Refer to "Removal and Installation AV Control Unit" Without Surround Sound (BOSE audio without surround sound system) or "Removal and Installation AV Control Unit" Base Audio (BOSE audio with surround sound system).





2.Remove the screw (A) from the bracket of the automatic drive positioner control unit (1).





3.Position the automatic drive positioner control unit aside and remove the CAN gateway (2) from the bracket by sliding it as shown.
4.Disconnect the harness connector from the CAN gateway and remove the CAN gateway.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
To prevent malfunction, be sure to perform "After Replace ECU" of "Read / Write Configuration" or
"Manual Configuration" when replacing CAN gateway. Refer to "Work Procedure" Configuration (CAN Gateway).
Revision: March 20122013 Infiniti JX