Memory Positioning Module: Service and Repair

AUTOMATIC DRIVE POSITIONER CONTROL UNIT

Removal and Installation


REMOVAL

1.Disconnect the negative battery terminal.
2.Remove cluster lid C (multifunction switch). Refer to "Removal and Installation Cluster Lid C Upper" Removal and Installation - Cluster Lid C Upper.





3.Remove the automatic drive positioner control unit screw (A).
4.Disconnect the two harness connectors from the automatic drive positioner control unit (1).
5.Remove automatic drive positioner control unit (1).

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
After installing the automatic drive positioner control unit, perform additional service. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Work Procedure" Work Procedure.
Revision: March 20122013 Infiniti JX