Removal and Installation

ICC STEERING SWITCH

Removal and Installation


REMOVAL

NOTE:
The ICC steering and audio switches are serviced as an assembly.
1.Remove steering wheel. Refer to "Removal and Installation" Removal and Installation.





2.Release pawls (black arrow) and remove steering wheel rear finisher (1)
from steering wheel (2).





3.Remove ICC steering and audio switch assembly screws (black arrow).
4.Remove ICC steering and audio switch assembly (1) from steering wheel (2).

INSTALLATION

Installation is in the reverse order of removal.
Revision: March 20122013 Infiniti JX

CAUTION:
Always perform the ICC system action test to check that the ICC system operates normally after replacing the millimeter wave sensor or repairing any ICC system malfunction. Refer to "Work Procedure (Vehicle-To-Vehicle Distance Control Mode)" Vehicle-to-Vehicle Distance Control Mode.
Revision: March 20122013 Infiniti JX