Evaporator Temperature Sensor / Switch: Service and Repair

INTAKE SENSOR

Removal and Installation


REMOVAL

1.Remove the front evaporator. Refer to "Removal and Installation Front Heating and Cooling Unit Assembly" Removal and Installation - Front Heating and Cooling Unit Assembly.





2.Remove the intake sensor (2) by pulling out of the front evaporator (1).

CAUTION:
- Mark the mounting position of the intake sensor.
- Do not damage the evaporator core.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Mount the intake sensor in the same position as the original intake sensor on the evaporator core.
Revision: March 20122013 Infiniti JX