Removal and Installation

GENERATOR

Removal and Installation


REMOVAL

1.Remove front RH wheel and tire. Refer to "Adjustment" Service and Repair.
2.Remove radiator assembly. Refer to "Removal and Installation" Removal and Installation.
3.Remove cooling fan assembly. Refer to "Removal and Installation" Removal and Installation
4.Remove drive belt auto-tensioner assembly. Refer to "Removal and Installation of Drive Belt Auto-tensioner" Service and Repair.
5.Disconnect generator wiring harness.
6.Disconnect harness retainers.
7.Remove bolts and generator bracket.
8.Remove generator.

INSTALLATION

Installation is in the reverse order of removal. Refer to "Exploded View" Exploded View
- Temporarily tighten bolts and nut then tighten nut and bolts in the specified numerical order.

CAUTION:
Be sure to tighten "B" terminal nut carefully.
- Install generator and check tension of belt. Refer to "Checking Drive Belt" Procedures.
- For this model, the power generation voltage variable control system that controls the power generation voltage of the generator has been adopted. Therefore, the power generation voltage variable control system
Revision: March 20122013 Infiniti JX
operation inspection should be performed after replacing the generator, and then make sure that the system operates normally. Refer to "System Description" System Description."Adjustment" Service and Repair