Removal and Installation

STARTER MOTOR

Removal and Installation


REMOVAL

1.Remove the engine room cover. Refer to "Removal and Installation" Exploded View.
2.Remove the battery tray and battery tray support. Refer to "Removal and Installation" Service and Repair.
3.Remove CVT fluid charging pipe. Refer to "Exploded View" Exploded View.
4.Disconnect the "S" connector, and the "B" terminal harness.
5.Remove the starter motor bolts, then remove the starter motor.

INSTALLATION

Installation is in the reverse order of removal.
Revision: March 20122013 Infiniti JX