Work Procedure

UNIT CHARACTERISTICS WRITING

Work Procedure


1. UNIT CHARACTERISTICS WRITING

With CONSULT





1.Confirm the unit characteristics (A) of electric controlled coupling.
NOTE:
Unit characteristics is 12-digit alphanumeric.
2.Turn the ignition switch OFF to ON.
3.Select "UNIT CHARACTERISTICS WRITE" in "WORK SUPPORT" for "ALL MODE AWD/4WD".
4.Input unit characteristics.
5.Select "Start".
6.Check that "UNIT CHARACTERISTICS WRITE COMPLETED"
is displayed.
- WORK END
Revision: March 20122013 Infiniti JX