Removal and Installation

RAIN SENSOR

Removal and Installation


CAUTION:
When the rain sensor is removed from the windshield, the rain sensor cannot be reused.

REMOVAL

1.Release the rain sensor finishers pawls using a suitable tool, then remove the rain sensor finisher.
2.Disconnect the harness connector from the rain sensor.
3.Release the metal spring clips, then remove the rain sensor from the windshield glass.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- The surface of the windshield should be cleaned.
- Do not touch gel/adhesive of the new part.
- Be sure the metal spring clips are locked so the rain sensor is installed securely.
Revision: March 20122013 Infiniti JX