B2130

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. STEP 1

Turn ignition switch ON.
- GO TO 2.

2. STEP 2

Check "Self diagnostic result" using CONSULT.
Is the DTC detected?
YES- Perform diagnosis procedure. Refer to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Turn ignition switch ON.
2.Check "Self diagnostic result" using CONSULT.
3.Erase the DTC.
4.Perform DTC confirmation procedure. Refer to "DTC Logic" .
Is the DTC displayed again?
YES- GO TO 2.
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.

2. REPLACE DRIVER SEAT CONTROL UNIT

Replace driver seat control unit.
- INSPECTION END