Luggage Rear Plate

LUGGAGE FLOOR TRIM

LUGGAGE REAR PLATE : Removal and Installation


REMOVAL

1.Open luggage floor board center.
2.Remove luggage floor finishers (LH and RH).





1.Remove nuts shown by the arrows in the figure.
2.Disengage luggage floor finisher (1) fixing clip and pawl using a remover tool (A), and then remove luggage side finisher.










3.Disengage luggage rear plate (1) fixing clips and pawls using a remover tool (A), and then remove luggage rear plate.





4.Remove luggage rear plate mask from luggage rear plate.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
- Visually check the clips and pawls for deformation and damage during installation. Replace with new ones if necessary.
- When installing luggage rear plate, check that clips and pawls are securely fitted in body panel holes, and press them in.