Operation CHARM: Car repair manuals for everyone.

Removal and Installation




CENTER CONSOLE ASSEMBLY

Removal and Installation


CAUTION:
When removing, always use a remover tool that is made of plastic.

REMOVAL






1.Remove instrument lower cover.
1.Pull disengaged pawls downward.
2.Pull back instrument lower cover.
3.Disconnect harness connectors.





2.Remove selector lever knob. Refer to "Removal and Installation" Removal and Installation.





3.Remove console finisher assembly.
1.Put front seat to rearmost position.
2.Pull console finisher assembly, upward to disengage from center console assembly.
3.Disconnect harness connectors.





4.Remove instrument center finisher RH.





1.Pull the instrument center finisher RH lower side, and then disengage the fixing clip.





2.Pull back instrument center finisher RH, and then disengage metal clips.
3.Disengage instrument center finisher RH fixing pawl from instrument panel assembly.










5.Remove instrument center finisher LH.





1.Pull the instrument center finisher LH lower side, and then disengage the fixing clip.





2.Pull back instrument center finisher LH, and then disengage metal clips.
3.Disengage instrument center finisher LH fixing pawl from instrument panel assembly.










6.Remove console rear finisher.





1.Put front seat to frontmost position.
2.Pull back console rear finisher with remover tool (A).
3.Disconnect harness connectors and harness clips.

CAUTION:
Apply protective tape (B) on the part to protect it from damage.





7.Remove center console assembly.





1.Remove center console assembly rear side fixing screws (A).
2.Put front seat to rearmost position.





3.Remove center console assembly front fixing screws (B).
4.Lift up center console assembly back side, and then remove center console assembly.

INSTALLATION

Install in the reverse order of removal.