Removal and Installation

FRONT PILLAR FINISHER

Removal and Installation


REMOVAL

1.Remove roof drip molding. Refer to "Removal and Installation" .
2.Remove front pillar finisher fixing screw.
3.Disengage clips with remover tool, and then remove front pillar finisher.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- Visually check the clips for deformation and damage during installation. Replace with new ones if necessary.
- When installing front pillar finisher, check that clips are securely fitted in body panel holes, and press them it.