Operation CHARM: Car repair manuals for everyone.

Entertainment System Control Module: Service and Repair




AV CONTROL UNIT

Removal and Installation


REMOVAL


CAUTION:
- Before replacing AV control unit, perform "Read/Write Configuration" to save or print current vehicle specification. For details, refer to "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL
UNIT : Description".
- Remove battery terminal and AV control unit after a lapse of 30 seconds or more after turning the ignition switch OFF.
NOTE:
After the ignition switch is turned OFF, the AV control unit continues operating for approximately 30 seconds.
Therefore, data corruption may occur if battery voltage is cut off within 30 seconds.
1.Remove cluster lid C. Refer to "Exploded View" Exploded View.
2.Remove AV control unit with a A/C auto amp. as a single unit from the body.
3.Remove bracket screws, and then remove AV control unit.

INSTALLATION

Installation is the reverse order of removal.

CAUTION:
- Be sure to perform "Read/Write Configuration" when replacing AV control unit. For details, refer to
"CONFIGURATION (AV CONTROL UNIT) : Special Repair Requirement" Configuration (AV Control Unit).
- Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.