For USA and Canada

ADDITIONAL SERVICE WHEN REPLACING ECM

Work Procedure


1. PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS

Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Refer to SEC35, "ECM : Work Procedure".
- GO TO 2.

2. PERFORM VIN REGISTRATION

Perform VIN registration. Refer to "Work Procedure" For USA and Canada.
- GO TO 3.

3. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING

Perform accelerator pedal released position learning. Refer to "Work Procedure" For USA and Canada.
- GO TO 4.

4. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING

Perform throttle valve closed position learning. Refer to "Work Procedure" For USA and Canada.
- GO TO 5.

5. PERFORM IDLE AIR VOLUME LEARNING

Perform idle air volume learning. Refer to "Work Procedure" For USA and Canada.
- END