Exterior View Display Module: Service and Repair

AROUND VIEW MONITOR CONTROL UNIT

Removal and Installation


REMOVAL


CAUTION:
Before replacing around view monitor control unit, perform "Read/Write Configuration" to save or print current vehicle specification. For details, refer to "ADDITIONAL SERVICE WHEN
REPLACING AROUND VIEW MONITOR CONTROL UNIT : Description".
1.Remove AV control unit. Refer to "Removal and Installation" Service and Repair.
2.Remove around view monitor control unit mounting screws.
3.Disconnect around view monitor control unit connector to remove around view monitor control unit.

INSTALLATION

1.Install in the reverse order of removal.
2.Perform camera image calibration. Refer to "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Special Repair Requirement" Special Repair Requirement.
3.Perform predictive course line center position adjustment. Refer to "PREDICTIVE COURSE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement" Special Repair Requirement.

CAUTION:
- Be sure to perform "Read/Write Configuration" when replacing around view monitor control unit. For details, refer to "CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT) : Special
Repair Requirement".
- Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.