Luggage Floor Rear Board

LUGGAGE FLOOR TRIM

LUGGAGE FLOOR REAR BOARD : Removal and Installation


REMOVAL

1.Open luggage floor board center (1).





2.Remove both bolts shown by the arrows in the figure, and then remove luggage floor board center.
3.Remove luggage floor finishers (LH/RH).





1.Remove bolts shown by the arrows in the figure.
2.Disengage luggage floor finisher (1) fixing pawl and clip using a remover tool (A), and then remove luggage side finisher.





4.Remove both luggage floor rear boards.
1.Fold down the third seat forward.





2.Remove rope hook (1) mounting bolt using a socket wrench (A), and then remove rope hook.





3.Disengage luggage floor board RH (1) fixing pawls and clips, and then remove luggage side finisher.
4.Disengage luggage floor board LH (2) fixing pawls and clips, and then remove luggage side finisher.






INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
- Visually check the clips and pawls for deformation and damage during installation. Replace with new ones if necessary.
- When installing luggage floor rear board, check that clips and pawls are securely fitted in body panel holes, and press them in.