Diagnosis Procedure

TAIL LAMP CIRCUIT

BACK DOOR SIDE : Diagnosis Procedure


1. CHECK TAIL LAMP (BACK DOOR SIDE) BULB

Check the applicable lamp bulb.
Is the inspection result normal?
YES- GO TO 2.
NO- Replace bulb.

2. CHECK TAIL LAMP (BACK DOOR SIDE) OPEN CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect IPDM E/R connector and tail lamp (back door side) connector.
3.Check continuity between IPDM E/R harness connector and tail lamp (back door side) harness connector.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace harness.

3. CHECK TAIL LAMP (BACK DOOR SIDE) GROUND OPEN CIRCUIT

Check continuity between tail lamp (back door side) harness connector and ground.





Is the inspection result normal?
YES- Check corresponding bulb socket and harness. Repair or replace if necessary.
NO- Repair or replace harness.