B-24

PART 1 OF 2





PART 2 OF 2

Sensor Signal Abnormality Criteria using TECH 2
1. While driving, the speed of one or two wheels 25% or more higher than that of the other wheels.
2. The speed of one or two wheels is 10 km/h (6 mph) or more higher than that of the other wheels.
3. During steady driving, wheel speed changes abruptly.

*1 The vehicle must run on a level paved road.

NOTICE: Even after repairing the faulty part the warning light (W/L) does not go out if the vehicle is at a stop. Turn the ignition switch to the ON position and drive the vehicle at 12 km1h or higher to make sure that the warning light goes out. It is important to verify that the correct tires are installed on vehicle.