Instrument Cluster Replacement

WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIRBAG AND SEAT BELTS/AIR BAGS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the cluster bezel from the instrument panel. Instrument Cluster Bezel Replacement

Instrument Cluster Remove/Install:

3. Remove the four screws that secure the instrument cluster to the instrument panel.
4. Pull the instrument cluster rearward far enough to disengage the two self-docking instrument panel wire harness connectors from the connector receptacles on the back of the cluster housing.
5. Remove the instrument cluster from the instrument panel.

INSTALLATION
1. Position the instrument cluster to the instrument panel.
2. Align the instrument cluster with the cluster opening in the instrument panel and push the cluster firmly and evenly into place. The instrument panel has two self-docking wire harness connectors that will be automatically aligned with, and connected to the cluster connector receptacles when the cluster is installed in the instrument panel.
3. Install and tighten the four screws that secure the instrument cluster to the instrument panel. Tighten the screws to 2.2 Nm (20 in. lbs.).
4. Install the cluster bezel onto the instrument panel. Instrument Cluster Bezel Replacement5. Reconnect the battery negative cable.