Engine Coolant Thermostat - Installation

3.0L DIESEL

1. Clean all sealing surfaces.
2. Position and install thermostat housing Tighten bolts to 9 Nm (80 lbs.in.).

NOTE: Inspect condition of all clamps and hoses, replace as necessary.

3. Connect coolant hoses and vent hose.
4. Install bracket for fuel line.
5. Close coolant drain.
6. Install engine cover Engine Cover - Installation.
7. Connect negative battery cable.
8. Fill coolant system to proper level with appropriate coolant mixture Service and Repair.

WARNING: Use extreme caution when engine is operating. Do not stand in direct line with fan. Do not put your hands near pulleys, belts or fan. Do not wear loose clothes.

9. Start engine and inspect for leaks.