Installation

INSTALLATION





WARNING: Vehicle Damage Warnings. No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

1. Loosen the fuel rail mounting bolts to install lines free of stress.

CAUTION: Inspect sealing cone at lines. Replace if compression points exist. Ensure lines are exactly located.

2. Position and install fuel lines. Tighten to 27 Nm (20 ft. lbs.).
3. Tighten fuel rail to 14 Nm (124 lbs. in.).
4. Install engine cover.
5. Connect negative battery cable.
6. Start engine, allow to warm, turn engine off and inspect for leaks.