Power Seat Switch: Testing and Inspection

POWER SEAT SWITCH

DRIVER WITHOUT MEMORY SEAT SYSTEM





1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to the appropriate diagnostic information. If not OK, replace the faulty power seat switch. If switch tests OK Testing and Inspection.




PASSENGER SEAT





1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to the appropriate diagnostic information table. If not OK, replace the faulty power seat switch. If switch tests OK Testing and Inspection.




DRIVER WITH MEMORY SEAT SYSTEM





1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat Power Seat Switch - Removal.
3. Use an ohmmeter to test the resistance of the power seat switch. Refer to the appropriate diagnostic information table. If not OK, replace the faulty power seat switch. If switch tests OK Testing and Inspection.