Engine Oil Pan - Removal

REMOVAL





1. Disconnect negative battery cable.
2. Remove the radiator fan Cooling Fan - Removal.
3. Remove the intake manifold Intake Manifold - Removal.





4. Install Special Tool 8534B Do not raise engine at this time.





5. Remove the structural cover Structural Dust Cover - Removal. using sequence shown.





6. Remove both left and right side engine mount through bolts (3).





7. Raise engine using Engine Support 8534B (1), to provide clearance to remove oil pan.
8. Drain engine oil and remove oil filter.






NOTE: Do not pry on oil pan or oil pan gasket. Gasket is mounted to engine and does not come out with oil pan.

9. Remove the oil pan mounting bolts and oil pan.
10. Unbolt oil pump pickup tube and remove tube and oil pan gasket from engine.