Rear Bumper Fascia - Removal

REMOVAL





1. Remove the rivets attaching the rear flare (3) to the wheel liner.
2. Separate the clips (4) attaching the rear flare to the rear fascia (1) and quarter panel (2).
3. Remove the rear flare.





4. Open the liftgate.
5. Remove the four push pin fasteners (1) and 2 screws (2) at the step pad area.





6. Remove the plastic rivets at the wheel wells (1).
7. Remove the two push pin fasteners and remove the rear wheel splash shields.





8. Remove the fascia (8) and disconnect the electrical connector (6 AND 7).





9. Remove the two push pin fasteners (3).
10. Remove the four push pin fasteners and the energy absorber.
11. Disconnect the park assist electrical sensors.
12. Remove the park assist sensors.