Splash Shield - Removal

REMOVAL

Front





1. Raise and support the vehicle Service and Repair.
2. Remove the wheel and tire to gain access to the front wheel house liner.
3. Remove the all push/pins (6), (9) from the wheel house liner.
4. Remove the all bolts (7) from the wheel house liner.
5. Remove the wheel speed sensor harness (1) from the wheel house liner.
6. Remove front wheel house liner from front wheel house opening.

Rear





1. Remove the wheel flare rivets (2).





2. Remove the push pin fasteners (4) and remove the splash shield (2).





3. Remove the screws and remove the splash guard (2) if equipped.