Intake Manifold - Installation

INSTALLATION





1. Install intake manifold seals (1,3).
2. Position intake manifold (2) in place.





3. Apply Mopar(R) Lock & Seal Adhesive to intake manifold bolts.
4. Install intake manifold bolts and tighten to 12 Nm (105 in. lbs.) in the sequence shown.
5. Position wiring harness in place and connect electrical connectors.
6. Connect fuel line.
7. Connect brake booster and vacuum hoses.
8. Install air cleaner assembly Air Cleaner Body - Installation.
9. Connect negative battery cable.