Inspection/Repair - W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






Signal Circuit Inspection

1. IG "ON" & ENG "OFF"
2. With controlling mirror with mirror switch of power window main switch, check voltage change (Input signal change) of terminal of vertical sensor.

Specification : It is as same as the signal waveform and data





3. Is the measured signal waveform within specification ?