Vacuum Pump: Service and Repair

70.50.20 Vacuum - Enhancer - KV6

Remove

1. Disconnect battery earth lead.
2. Remove engine acoustic cover. Service and Repair





3. Release enhancer from support clips.
4. Disconnect multiplug from solenoid valve if fitted.
5. Release and disconnect servo pipe.
6. Release clip and disconnect from intake hose.
7. Release and remove enhancer assembly from inlet manifold.

Refit
1. Fit enhancer to inlet manifold.
2. Connect to intake hose and secure with clip.
3. Connect servo hose.
4. Connect multiplug to solenoid valve.
5. Fit enhancer into clips.
6. Fit engine acoustic cover. Service and Repair
7. Connect battery earth lead.