G862187T18 : Check For Installation of Bluetooth Module
Pinpoint TestsNOTE: Visually inspect for any of the following conditions and rectify any fault identified prior to carrying out any tests on the MOST Network.
^ Any sharp bends in the optical fibre harness (check for this before disturbing any module or connector).
^ Incorrect engagement of any optical connectors
^ Incorrect engagement of any electrical connectors
^ Damage to the optical fibre harness (chafing, abrasion, kinking, cuts, break, etc)
^ Incorrect assembly of the optical network
^ Unless otherwise stated, ensure vehicle ignition status is set to 'ON' when carrying out MOST Network tests.
G862187t18 : CHECK FOR INSTALLATION OF BLUETOOTH MODULE
1. Check for installation of bluetooth module.
^ Is there a bluetooth module installed to the vehicle?
->Yes
GO to Pinpoint Test G862187t19.G862187T19 : Check For Failure of Optical Fibre to Bluetooth Module
->No
GO to Pinpoint Test G862187t21.G862187T21 : Check For Installation of Digital Audio Broadcast/Satellite Radio Module