G862187T23 : Check For Failure at Digital Audio Broadcast/Satellite Radio Module
Pinpoint TestsNOTE: Visually inspect for any of the following conditions and rectify any fault identified prior to carrying out any tests on the MOST Network.
^ Any sharp bends in the optical fibre harness (check for this before disturbing any module or connector).
^ Incorrect engagement of any optical connectors
^ Incorrect engagement of any electrical connectors
^ Damage to the optical fibre harness (chafing, abrasion, kinking, cuts, break, etc)
^ Incorrect assembly of the optical network
^ Unless otherwise stated, ensure vehicle ignition status is set to 'ON' when carrying out MOST Network tests.
G862187t23 : CHECK FOR FAILURE AT DIGITAL AUDIO BROADCAST/SATELLITE RADIO MODULE
1. Connect OBT to digital audio broadcast/satellite radio module MOST connector C4ME43B.
2. Switch OBT 'ON' and set to 2+0 option.
3. Select the visible LED option.
^ Is the Rx lamp/LED permanently 'ON' and the HLDF screen permanently displaying 'Home screen menu' or Land Rover logo?
->Yes
Check/repair power feed and ground lines to digital audio broadcast/satellite radio module. If power feed and ground lines ok, install a new digital audio broadcast/satellite radio module.
Satellite Radio Tuner
->No
GO to Pinpoint Test G862187t24.G862187T24 : Check For Failure of Optical Fibre to Intermediate Connector C23S Pin 1